Charge at Home. Charge at Work. We Install It Right.
Licensed EV Charger Installation for Edmonton Homes, Businesses & Multi-Unit Properties
EV Charger Installation Edmonton — Residential, Commercial & Multi-Unit Charging Solutions
Armada Electrical installs EV chargers for Edmonton homes, businesses, condos, and fleet operations. Whether you need a Level 2 home charger in your garage, a Tesla Wall Connector, workplace charging stations for employees, or a multi-unit charging solution for a condo parkade, Armada handles the full installation — from electrical assessment and panel capacity verification through to permitting, installation, and final inspection.
Edmonton’s EV adoption is accelerating, and the electrical infrastructure behind your charger matters as much as the charger itself. A properly sized circuit, correct breaker, and code-compliant installation protect your vehicle, your property, and your investment. Armada has been doing electrical work in Edmonton since 1974 and brings that same standard of workmanship to every EV charger installation we complete.
Why Your EV Charger Installation Needs a Licensed Electrician
An EV charger draws significant power — a Level 2 charger typically requires a dedicated 240-volt, 40- to 60-amp circuit. That’s comparable to your stove or dryer, not a standard outlet. Installing an EV charger involves assessing your panel’s available capacity, running appropriately sized wiring, installing the correct breaker, and ensuring the entire circuit meets the Canadian Electrical Code and Edmonton’s permitting requirements. A licensed electrician ensures your charger installation is safe, code-compliant, and covered by warranty.
Armada’s electricians are experienced with the specific demands of EV charger circuits, including load calculations for homes that are already near panel capacity, sub-panel installations where needed, and the permitting process required by the City of Edmonton.
Residential EV Charger Installation: Most Edmonton homeowners install a Level 2 charger in their attached garage, which charges a typical EV battery from near-empty to full overnight. Armada installs all major charger brands, including Tesla Wall Connectors, ChargePoint Home Flex, Grizzl-E, and others. We assess your panel capacity, recommend the optimal circuit size for your charger and vehicle, and complete the full installation with permit and inspection.If your home’s electrical panel doesn’t have sufficient capacity for a dedicated EV circuit, Armada can upgrade your panel or install a sub-panel as part of the project. We handle the complete scope so you aren’t coordinating between contractors.
Commercial & Fleet EV Charging: Businesses across Edmonton are installing EV chargers for employees, customers, tenants, and fleet vehicles. Commercial EV charger installation involves different considerations than residential — higher power requirements, networked charging management, multiple simultaneous stations, load balancing across the electrical system, and often Level 2 and DC fast charging combinations. Armada designs and installs commercial EV charging systems sized for your building’s electrical capacity and your operational needs. Fleet operators transitioning to electric vehicles need charging infrastructure that supports overnight depot charging, route scheduling, and scalability as the fleet grows. Armada works with fleet managers to plan charger placement, circuit distribution, and future expansion capacity from the initial installation.
Tesla Wall Connector Installation: Tesla’s Wall Connector is the recommended home charger for Tesla vehicles, delivering up to 44 miles of range per hour on a 60-amp circuit. Armada installs Tesla Wall Connectors throughout Edmonton, handling the electrical assessment, dedicated circuit installation, mounting, and configuration. We also install the Wall Connector in homes with non-Tesla EVs — the current generation supports all J1772 vehicles through an adapter.
Level 2 Charger Installation: EV chargers are classified into three levels based on power output and charging speed. Level 1 uses a standard 120-volt household outlet and adds roughly 5–8 kilometres of range per hour — adequate for plug-in hybrids but impractical as the sole charging method for a full battery EV. Level 2 chargers operate on a 240-volt dedicated circuit and deliver 30–70 kilometres of range per hour, making them the standard for home and workplace charging. DC fast chargers (Level 3) deliver 80% charge in 20–40 minutes and are used in commercial and public charging applications. Armada installs Level 2 and DC fast chargers for residential and commercial properties across Edmonton.
Condo & Multi-Unit EV Charging: Installing EV chargers in condos, apartments, and multi-unit buildings presents unique challenges: shared electrical infrastructure, parking stall assignments, metering for individual usage, and condo board approval. Armada works with property managers and condo boards to design multi-unit EV charging solutions that address load management, fair cost allocation, and scalable infrastructure that accommodates future demand as more residents purchase EVs.
EV Charger Rebates & Incentives: Federal and provincial incentive programs can offset a portion of your EV charger installation cost. Eligibility, amounts, and application requirements change regularly. Armada stays current on available programs and can advise you on which incentives apply to your installation. Visit our dedicated EV Charger Rebates & Incentives page for current program details.
How Armada’s EV Charger Installation Works
1. Assessment — We evaluate your electrical panel, available capacity, and charger location to determine the scope of work. For commercial projects, this includes load calculations and site planning.
2. Recommendation — Based on the assessment, we recommend the charger type, circuit size, and any panel upgrades or sub-panels needed. We confirm charger compatibility with your vehicle.
3. Permitting — Armada obtains the required electrical permit from the City of Edmonton before starting work.
4. Installation — We install the dedicated circuit, mount the charger, and connect everything to your electrical system. Typical residential installations are completed in a single day.
5. Inspection & Handover — The installation is inspected, and we walk you through charger operation, scheduling features, and any app-based controls.
-
Most Edmonton homes with a 100-amp or 200-amp panel can accommodate a Level 2 EV charger. If your panel is at or near capacity, Armada can install a sub-panel or upgrade your main panel as part of the EV charger project. We assess this during the initial site evaluation.
-
A standard residential EV charger installation typically takes 3 to 5 hours. If panel upgrades or longer wire runs are required, the installation may extend to a full day. Commercial installations vary based on the number of chargers and electrical infrastructure involved.
-
Yes. EV charger installation in Edmonton requires an electrical permit and a final inspection. Armada obtains the permit, schedules the inspection, and provides documentation confirming the installation is code-compliant.
-
Armada installs all major EV charger brands, including Tesla Wall Connector, ChargePoint, Grizzl-E, FLO, JuiceBox, Wallbox, and others. We also install commercial-grade networked chargers from ChargePoint, FLO, ABB, and Siemens for business and multi-unit applications.
Ready to install your EV charger?
Call (780) 484-6720 or request your free assessment today.
Armada Electrical installs EV chargers for homes, businesses, condos, and fleets across Edmonton. Licensed, permitted, inspected — every time.